PELATIHAN DAN SERTIFIKASI

CERTIFICATION

Riset terbaru dari Organisasi Perburuhan Dunia atau ILO menyebutkan pembukaan pasar tenaga kerja mendatangkan manfaat yang besar. Selain dapat menciptakan jutaan lapangan kerja baru, skema ini juga dapat meningkatkan kesejahteraan 600 juta orang yang hidup di Asia Tenggara.

Pada 2015 mendatang, ILO merinci bahwa permintaan tenaga kerja profesional akan naik 41% atau sekitar 14 juta. Sementara permintaan akan tenaga kerja kelas menengah akan naik 22% atau 38 juta, sementara tenaga kerja level rendah meningkat 24% atau 12 juta.

Namun laporan ini memprediksi bahwa banyak perusahaan yang akan menemukan pegawainya kurang terampil atau bahkan salah penempatan kerja karena kurangnya pelatihan dan pendidikan profesi.

Sesuai dengan SKKNI, PT. SLV Metropolitan Indonesia siap melakukan 100 lebih jenis sertifikasi menyambut MEA (Masyarakat Ekonomi ASEAN).

Skema Sertifikasi Nasional

(National Certification Scheme)

 

• 1.    Inspektur Rig.
• 2.    Operator Produksi – Operator Muda Produksi (OPM); Madya Produksi (OPA); Operator Produksi (OPT); Operator kepala (OPK); Pengawas Operasi Produksi (POP); Pengawas Utama Operasi Produksi (PUP).
• 3.    Operator Pesawat Angkat – Kran Mobil s/d 25 Ton; s/d 50 Ton; di atas 50 Ton.
• 4.    Operator Pesawat Angkat – Kran Putar Tetap s/d 25 Ton; s/d 50 Ton; diatas 50 Ton.
• 5.    Operator Pesawat Angkat – Kran Jembatan s/d 25 Ton; s/d 50 Ton; diatas 50 Ton.
• 6.    Operator Pesawat Angkat – Forklift.
• 7.    Operator Pesawat Angkat – Ahli Juru Ikat (Rigging).
• 8.    Pengeboran Darat – Operator Lantai Bor (Floorman); Operator Menara Bor Darat (Derrickman); Juru Bor Darat (Driller); Ahli Pengendali Pengeboran.
• 9.    Perawatan Sumur – Operator Lantai Perawatan Sumur (OLP); Operator Menara Perawatan Sumur (OMP); Operator Unit Perawatan Sumur (OUP); Ahli pengendali Perawatan Sumur (APS); Pengawas Perawatan Sumur (PPS).
• 10.  Pipe Fitter.
• 11.  K3 Migas – Operator K3; Pengawas Utama; Pengawas K3; Auditor K3; Operator Gastester.
• 12.  Petugas Penanganan Bahaya H2S.
• 13.  Welding Inspector.
• 14.  Laboratorium Pengujian – Operator Pengujian Air; Operator Pengujian Crude Oil; Operator Pengujian BBM Penerbangan; Operator Pengujian BBM Non Penerbangan; Operator Pengujian Minyak Lumas; Operator Pengujian Gas Bumi; Operator Pengujian Petrokimia.
• 15.  Sistem Manajemen Lingkungan (Limbah Padat dan B3) – Jabatan: Pengendali.
• 16.  Sistem Manajemen Lingkungan (Limbah cair) – Jabatan: Pengendali.
• 17.  Penyelidik Seismik –  Juru Ukur; Ahli Topografi; Juru Bor Seismik; Juru Tanam Seismik; Juru Tembak Seismik; Ahli Rekam.
• 18.  Boiler – Operator Boiler Kelas Satu; Operator Boiler Kelas Dua; Pengawas Operasi Boiler.
• 19.  Scaffolding – Pembantu Operator; Operator Scaffolding; Perancang Scaffolding; Pengawas Scaffolding; Teknisi Maintenance & Repair; Quality Control.
• 20.  Fluida Pengeboran, Komplensi dan Kerja Ulang sumur – Juru Aduk Fluida ; Ahli Fluida.
• 21.  Pengelolaan SPBU – Operator SPBU ; Pengawas SPBU ; Pengelola SPBU ; Teknisi SPBU ; Pekerjaan Administrasi SPBU ; Teknisi Services Station ; Pramuniaga.
• 22.  Perawatan Mekanik –  Teknisi I ;  Teknisi II ; Teknisi III ; Supervisor.
• 23.  Pressure Relieve Device – Tenaga Teknik ; Teknisi ; Pengawas.
• 24.  Instrumentasi dan Kalibrasi Teknisi Instrumentasi Tingkat I ; Tingkat 2.
• 25.  Instrumentasi dan Kalibrasi Pengawas.
• 26.  Instrumentasi dan Kalibrasi – Teknisi Kalibrasi Suhu ; Teknisi Kalibrasi Tekanan ;  Teknisi Kalibrasi Densitas ; Teknisi kalibrasi Volume.
• 27.  Teknisi Operasi Yunior CDU – Jabatan: Teknisi Operasi Yunior CDU.
• 28.  Pengambilan Contoh Minyak dan Gas Bumi – Operator Pengambilan Contoh minyak Bumi ; Operator Pengambilan Contoh Gas Bumi ; Operator Pengambilan Contoh BBM, BBN, Pelumas ; Operator Pengambilan Contoh Udara ; Operator Pengambilan Contoh Limbah ; Operator Pengambilan Contoh Air.
• 29.  Pengelolaan SPPLG – Sekuriti SPPLG ; Driver SPPLG ; Petugas Administrasi SPPLG ; Gate Keeper SPPLG ; Operator SPPLG ; Pengawas Prod atau Kepala Regu SPPLG ; Pengawas Teknik dan K3L ; Kepala SPPLG.
• 30.  Pengukur isi Tangki Minyak Bumi dan Hasil Olahan.
• 31.  Teknik Listrik Migas – Teknik Sistim Pembangkit ; Teknik Sistim Distribusi ; Teknik Sistim Utilitas ; Supervisor.
• 32.  Wellsite Geology – Mud Logger ; Operator Geologist ; Wellsite Geologist.
• 33.  Welder Pengelasan Bawah Air.
• 34.  Operasi Serah Terima Bahan Bakar Cair – Loading Master.
• 35.  Operator Blending – Jabatan: Operator Blending.
• 36.  Crane Inspector.
• 37.  Inspektur Bejana Tekan.
• 38.  Inspektur handak.
• 39.  Inspektur Pipa Penyalur.
• 40.  Operator Pemrosesan Gas Bumi.
• 41.  Inspektor Rotating Equipment.
• 42.  Inspektur Tanki Timbun.
• 43.  Pengawas SKPI – Inspektur Instalasi.
• 44.  Inspektur Kelistrikan.
• 45.  Risk Based Inspection (RBI) – Asisten Engineer (Level Basic) ; Engineer (Level I).
• 46.  Inspektur Platform.
• 47.  NDT Level 3.
• 48.  Welding Supervisor
• 49.  Operasi Penambangan NQF 4
• 50.  Operasi Penambangan NQF 5
• 51.  Geologi / Eksplorasi NQF 4
• 52.  Geologi/Eksplorasi NQF 5
• 53.  Manajemen Perawatan Peralatan Tambang NQF 4
• 54.  Perawatan Peralatan Tambang Tyre NQF 5
• 55.  Perawatan Peralatan Tambang Welding NQF 5
• 56.  Pengolahan Hasil Tambang NQF 4
• 57.  Pengolahan Hasil Tambang NQF 5
• 58.  Perencanaan Tambang Terbuka Jangka Pendek NQF 4
• 59.  Perencanaan Tambang Terbuka Jangka Pendek NQF 5
• 60.  Perencanaan Tambang Terbuka Jangka Panjang NQF 6
• 61.  Keselamatan dan Kesehatan Kerja NQF 6
• 62.  Wireline Logging
• 63.  Instrumen Sistem Alat Ukur
• 64.  Auditor Energi Bangunan Gedung
• 65.  Auditor Energi Industri
• 66.  Skema Sertifikasi Klaster Penanganan Kas Kecil
• 67.  Skema Sertifikasi Klaster Penanganan Korespondensi
• 68.  Skema Sertifikasi Klaster Pelayanan Prima
• 69.  Skema Sertifikasi Klaster Penanganan Telepon
• 70.  Skema Sertifikasi Klaster Penanganan Surat/Dokumen
• 71.  Skema Sertifikasi Klaster Penanganan Kearsipan
• 72.  Skema Sertifikasi Klaster Penanganan Perjalanan Dinas
• 73.  Skema Sertifikasi Klaster Pengelolaan Agenda Pimpinan    
• 74.  Skema Sertifikasi Klaster Sekretaris
• 75.  Skema Sertifikasi Klaster Sekretaris Yunior
• 76.  Skema Sertifikasi Klaster Administrasi Kantor
• 77.  Skema Sertifikasi Klaster Mempersiapkan dan Mengoperasikan

International Certification Scheme

TWI Training and Examination Services across the globe

TWI is the world’s largest provider of training in non-destructive testing (NDT), welding, welding inspection and a host of allied disciplines.

Every year more than 26,000 customers globally benefit from our comprehensive programme of industrial training and development programmes. Programmes available include NDT training, welding inspection, plant inspection, quality control, underwater inspection, practical welding health and safety.

Training with TWI leads to internationally recognised qualifications, delivering tangible benefits to individual careers and increasing business capabilities. Our mission is to create value through knowledge transfer and the development of skills and competence for the global engineering community.

Standard courses are scheduled at all TWI venues and customised training can be arranged to suit particular needs. TWI is a flexible training provider, able to match courses to your personal, company or industry requirements.

Courses and examinations are designed to service all key industry sectors including oil and gas, aerospace, construction, power (nuclear, fossil, renewables), automotive, rail, marine, manufacturing.

Courses are supported by internationally recognised certification from awarding bodies including CSWIP, BGAS-CSWIP, PCN,EWF/IIW, ASNT, IOSH, NEBOSH. Courses are led by certified experts, delivering exactly the knowledge required to meet the demands of industry around the world.

TWI’s expanding portfolio of courses and certification schemes is regularly reviewed, with new products regularly designed and introduced to maintain TWI’s position as the world leader in its field.

TWI Industrial Members qualify for a 10% discount on all training courses. Find out more about Industrial Membership

TWI Ltd

TWI is a global leader in technology engineering providing research and consultancy to its members. Respected for its expertise, professionalism, impartiality and confidentiality, TWI works with the most influential companies worldwide across all industry sectors. Find out more (www.twi-global.com)

   

TRAINING AND UP GRADING SKILL, KNOWLEDGE, AND ATTITUDE

·         JWES ( THE JAPAN WELDING ENGINEERING SOCIETY )

Start on October 15^th  to 30^th, 2011 (Saturday and Sunday, 10.00 – 16.00) Examination by JWES on November 2011

-          AWE (ASSOCIATE WELDING ENGINEERING)

Course Fee Rp. 3,000,000 

-          WE (WELDING ENGINEERING)

Course Fee Rp. 4,000,000

-          Re – Exam Rp. 1,000,000

·   Welding Inspector (Saturday and Sunday, 17.00 – 21.00)

Course material base on SKKNI (Standar Kompetensi Kerja Nasional Indonesia) from LSP (Lembaga Sertifikasi Profesi) LAS and Certified by BNSP (Badan Nasional Sertifikasi Profesi)

-          Start on September 17^th , 2011 until November 27^th ,2011

-          Start on Oktober 29^th,2011 until January 21^st,2012

Course Fee Rp. 8,500,000 (Delapan Juta Lima Ratus Ribu Rupiah)

·   Welder 3G/4G (Monday to Friday, 17.00 – 21.00)

Start on September 26^th , 2011 until October 21^st ,2011

Start on October 03^rd to 27^th ,2011

Course Fee Rp. 6,000,000 (Enam Juta Rupiah)

·   Welder 6G (Monday to Friday, 17.00 – 21.00)

Start on October 31^st , 2011 until November 25^th ,2011

Course Fee Rp. 6,000,000 (Enam Juta Rupiah)

·   Operator Boiler K3 (Monday to Friday, 17.00 – 21.00)

Depnakertrans Certificated. Start October 03^rd to 07^th,2011

Course Fee Rp. 4,000,000 (Empat Juta Rupiah)

·   Operator Forklift K3 (Monday to Friday, 17.00 – 21.00) Depnakertrans Certificated. Start October 03^rd to 07^th,2011

Course Fee Rp. 4,000,000 (Empat Juta Rupiah)

·   AK3 Umum (Monday to Friday, 17.00 – 21.00)

Depnakertrans Certificated. Start on November 07^th to 18^th ,2011

Course Fee Rp. 8,500,000 (Delapan Juta Lima Ratus Ribu Rupiah)

·   NDT Course (Monday to Friday, 17.00 – 21.00)

MT/PT , UT , RT

·   Upgrading and Certification Welder (InHouse Training)

4 (four) days Upgrading Skill and Knowledge Training (10 participant per Group), Course Fee Rp. 15,000,000 (Lima Belas Juta Rupiah)

·  BST (BASIC TRAINING SAFETY) and SEAMAN BOOK

   Start on October 10^th to 19^th,2011 (8X pertemuan, jam 10.00 – 15.00)

   Course Fee Rp. 2,000,000 (Dua Juta Rupiah)

·         Competence Examination Welder or Welding Inspector:

BNSP ( Badan Nasional Sertifikasi Profesi ) Examination

Rp. 2.500.000,-/Person

·      Terms Of Payment :

·  100% 2 (two) weeks Before Start of Training

·         Delivery and Schedule

·  Saturday and Sunday or Monday to Friday, on 17.00 – 21.00

·  Material Of Training As Attachment

·         Scope Of Work

·  Scope Of Work Sekolah Las Van-ovan is as follows :

o    Provide all Facility Training, Accommodation, And Class for Training at Sekolah Las Van-Ovan Cilegon

o    Provide sample for Welding Inspector practice and Certification

o    Provide Instructor For Welding Inspector Training as Requirement

o    Provide Mobilization, Demobilization, Transportation, And Messing For Instructor.

All kind of a Training Course can be held In House Training with time and schedule based on company needed.

Thank you for your kind cooperation if you have any some clarification please do not hesitate to contact us at +62-8777 1200 615 ( Helman Novrando ).

ATTACHMENT

MATERIAL AND SCHEDULE OF TRAINING

WELDER TRAINING FOR TRAINING WELDER SMAW
No	Dated	Material For Training	Instructor
1	Minggu Pertama	Teory: -     Welding Process for  SMAW. -     Welding Prameters for SMAW. -     Welding Equipment for SMAW. -     Welding Consumable for SMAW.	1.    Ir. Totok Suprawoto 2.    Idil Fithriansyah, MT, M.Si
2	Minggu Ke-2	Pratice: -     Preparation of  SMAW -     Welding Position 1G & 2G Pelat	1.    Ir. Totok Suprawoto 2.    Idil Fithriansyah, MT, M.Si
3	Minggu Ke-3	Pratice: -     Welding Position 3G & 4G/6G -     Welding Position 1G & 2G Pipa	1.    Ir. Totok Suprawoto 2.    Idil Fithriansyah, MT, M.Si

OPERATOR BOILER K3
No	Material For Training
1	Basic Material: -     Kebijakan Keselamatan dan Kesehatan Kerja -     Peraturan perundangan Pesawat Uap -     Dasar-dasar K3 dan P3K
2	Core Material: -     Jenis Pesawat Uap dan cara kerjanya -     Fungsi Appendages/perlengkapan pesawat uap -     Air pengisi ketel uap dan cara pengolahannya -     Sebab-sebab peledakan pesawat uap -     Cara mengoperasikan pesawat uap -     Persiapan pemeriksaan dan pengujian pesawat uap -     Pengetahuan instalasi listrik untuk ketel uap -     Pemeriksaan secara tidak merusak -     Perpindahan panas -     Pengetahuan tentang bahan bakar dan pembakaran -     Analisa kecelakaan peledakan -     Cara inspeksi dan reparasi pesawat uap
3.	Exam : -       Teory -       Practice

OPERATOR FORKLIFT K3
No	Material For Training
1	Basic Material: -     Kebijakan Keselamatan dan Kesehatan Kerja -     Peraturan perundangan Pesawat Angkat dan Angkut -     Dasar-dasar K3 dan P3K
2	Core Material: -     Pengetahuan dasar forklift -     Pengetahuan tenaga penggerak dan hidrolik -     Perangkat keselamatan kerja ( Safety device ) -     Sebab-sebab kecelakaan -     Factor-faktor yang mempengaruhi beban kerja aman -     Pengoperasian aman -     Perawatan dan pemeriksaan harian
3.	Exam : -       Teory -       Practice

YEAR 2011 NDT COURSE SCHEDULE

Course	Schedule	Day	Closing Date	Fee
				Course & Exam	Re-Certificate
Penetran & Magnetic Particle	18 April - 24 April 2011	7	14 April 2011	6,000,000	3,500,000
PT & MT Level II	16 May - 22May 2011	7	12 May 2011	6,000,000	3,500,000
(56 hours )	11 June - 17 June 2011	7	08 June 2011	6,000,000	3,500,000
	18 July - 24 July 2011	7	14 July 2011	6,000,000	3,500,000
	08 Augst -14 Augst 2011	7	04 Augst 2011	6,000,000	3,500,000
	06 Sept - 12 Sept 2011	7	26 Augst 2011	6,000,000	3,500,000
	03 Oct - 09 Oct 2011	7	29 September 2011	6,000,000	3,500,000
	07 Nov - 13 Nov 2011	7	03 November 2011	6,000,000	3,500,000
	28 Nov - 04 Nov 2011	7	24 November 2011	6,000,000	3,500,000
Ultrasonic testing*	25 April - 07 May 2011	13	20 April 2011	6,000,000	3,500,000
UT Level II	23 May - 04 June 2011	13	19 May 2011	6,000,000	3,500,000
( 100 hours )	04 July - 16 July 2011	13	30 June 2011	6,000,000	3,500,000
	25 July - 06 Augst 2011	13	21 July 2011	6,000,000	3,500,000
	13 Sept - 25 Sept 2011	13	09 September 2011	6,000,000	3,500,000
	10 Oct - 22 Oct 2011	13	06 October 2011	6,000,000	3,500,000
	14 Nov - 26 Nov 2011	13	10 November 2011	6,000,000	3,500,000
Radiography Interpreter Level II	Contact us	7		5,000,000	3,500,000
( 56 hours )

* Fee of Ultrasonic Testing exclude UT equipment rent

Biodata Of Our Instructor :

Ir. Totok Suprawoto

-      Instructor Las BBLKI Serang and Accessor For Badan Nasional Sertifikasi.

-      Dept. Industrial Communication and Relation of API Banten

-          Asean Skill Competition IV Jakarta, V Vietnam, VI Brunai Darussalam, VII Malaysia (Juri/Expert and Workshop Supervisor)

-          LPS – LAS, (Penyedia, Supervisi, Ketua Pelaksana  UJK Welder Personil di TUK-Las BBLKI Serang)

-          AWE (Associate Welding Engineering) – JWES (The Japan Welding Engineering Society)

Joko Sudarno

-          Classification as Welding Engineer.

-          Responsible for : Welding Procedure Specification (WPS) / Procedure Qualification Record (PQR), Welding & NDT Plan, Welder Performance Qualification Record / Welder Certification, Mechanical Test , etc.

Epriyanto

-          Sr. Prod Welding Engineer And Welding Trainner.

-          Responsible for : To advice project team of the Company capability of Welding Process for New Contract requirement,Study carefully the contract requirement in accordance to related Welding Standard, Communicate with Construction Engineering Department if any joint detail in the drawing which is not relevant with manufacturing process or efficiency/method.

Yuddy Slamet Rasidi, ST

-          Production Welding Coordinatoor

-          Welding Inspector PCN Level 2 (WI-2)

-          Magnetic Particle (MPI)8, Dye Penetrant Testing (DPI) Training course for ASNT NDT — Level ll

-          Ultrasonic Testing Training Course for ASNT NDT — Level II

-          Radiographic Interpreter Training Course for ASNT NDT — Level II

Ujang Budiman, ST

-          Welding  Section Head

-          AWS-CWI  Welding Inspector – Singapore

-          Benchmarking of Welding Tecnology of Blade Ring mfg in Budapest – Hongaria  &  Muelhem-Jerman

Ir. Wiratna Supendi

-          Quality Control  Manager

-          Regulate and supervise the Quality Control Inspection Activities.

-          Reviewing the Contract Documents in order to prepare the MPS and ITP Project.

-          Review and qualify the Working Procedures Quality Control. 

-          Prepare Training Schedule Personnel (internal and external certification).

-          Scheduling Equipment Calibration and Maintenance QC inspection tools.

-          Preparing for the Implementation of Internal and External Audit annual ISO 9001:2000, the American Petroleum Institute (API) Monogram, ASTM and ISO. 

Ir. Susilo Wibowo

 Skill Technician with Refractory And Insulation Work in Indonesia for Fertilizer, Refinery, Power Station, And Pipe Line

Inspector refractory which the duties and responsibility is to ensure all refractory and insulation activities are strictly comply with code, standard and client specification. As the Refractory/Insulation Inspector plays with vital role in maintence requirement of Refractory and Insulation Work.

Familirization with the Refractory Material as Plibrico , Harbison Worker/ AP Green and etc.

Familirization to applicable with code, standard, or specification and also with Approved Drawing.

Good knowledge and conversant in welding job application

-          Welding Technology, Design, Construction and Consumables

-          Welding Metallurgy, Material and its Behavior

-          Welding Construction Code : ASME (I,V,VIII,IX); API 1104; AWS D1.1,etc

-          Weld and Base Metal Defect, Failure Analysis

-          Basic DT and NDT application

·      CSWIP 3.1 Training (TWI), Period August25, Up To 29, 2008, Jakarta (Have Attendance Certificate)

·      Program Welding Inspector Training with Welding Study Center/ WSC (February11, up to July 15, 2009), Jakarta. (Have Certificate)

·      Non Destructive Testing (NDT) Training Specialist for Magnetic Particle Test
(MT) and Dye Penetrant Test (PT) ASNT Level II with WSC expired 2014

H. Syarifuddin Mesabim

-          Pertamina 1972 – 1996 ,24 years in Pertamina Oil Refineries as Refinery/plant ass.Inspector till Sr. Refinery Inspection Engineer at various Plant as Hydrocracker, Topping Unit, Platforming, LPG Tanks, Jetty, etc.

-          PT.Chandra Asri Petrochmechal Center ( CAPC ) 1996 s/d 200 at Cilegon Banten as Maintenance & Engineering Inspection  Manager.

-          ADGAS  2007  Onstream Plant Piping Integrity Project of LNG Plant Adgas at DAS Island Abudhabi as Senior Inspection Engineer.

-          PT.CBI Fabricators & Maintenances Company  2007 till 2009 as technical Advisor.

-          PT.Mesitech Mitra Bangun 2009 till 31 Desember 2010 (Out  sourching company) As CMASS Assessor under Training section of BP. LNG Plant  Tangguh, West Papua with jobs as Coacher, Trainner and Assessment for Plant  Equipments especially Static Equipment.

Mokhamad Bakri

Key Performance Indicator (KPI) Auditor

Responsibilities:

1. Audit Fabrication Procedure and activities
2. Audit QA/QC Procedure and activities
3. Audit Support Procedure and activities all department
4. Audit HSE Procedure and activities
5. Audit Key Performance Indicator All Department
6. All audit activities depend schedule and request of management
7. All audit activities including prepare report
8. Assist prepare Work Procedure All Department

Suryana. ST. Msi

Lecturer/Research Engineer at Metallurgical Engineering Department, Faculty of Engineering, The University of  Sultan Ageng Tirtayasa, Banten. FIELDS OF SPECIALIZATION :

• Physical Metallurgy of Metals and Alloys
• Technology and Metallurgy of Welding
• Metal Casting and Foundry Technology
• Modeling and Simulation of Metallurgical Process
• Design and Selection of Materials

Ir. Y. Agus Jayatun, MT.,IPP

Lecture of Mechanical Endineering at Sekolah Tinggi Teknologi Nasional Yogyakarta.

Instructor Experiences 2003 up to now  :              

·         Centrifugal Pump; Operation and Maintenance

·         Compressor; Operation and Maintenance

·         Boiler; Operator Sertification

·         Maintenance Management

·         Total Alignment and Balancing

·         Mechanical Power Transmision

·         Pipeline design, construction and maintenance

·         Control Valve, design, operation and maintenance

·         Rotating Equipment; Operation and Maintenance

·         Bearing; Design and Maintenance

·         Lubrication

·         Vibration analysis and diagnostic

·         Above Ground Storage Tank

·         Corrosion Control : Sacrifice Anode, Impressed Current, Galvanizing.

·         Metallurgy for non metallurgic engineers

·         Health, Safety and Environment (HSE)

·         Heating, Ventilating and Air Conditioning System (HVAC).

Muharram Salimung

Experience for more than 20 years on the Steel Works (Engineering, Fabrication, Construction, Installation and Testing also Pre-commissioning/Commissioning) both onshore and offshore projects, chemical refinery plant, gold mining plant, coal mining plant, material handling system, power plant, fabrication of steel bridge and Marine structures.

Specific works for: Civil/Steel Structural, Pressure Vessel, Steel Storage Tank, Mechanical Equipment, Piping System, Submarine Pipeline and Onshore & Underground Pipelines, included also Painting/coating.

• Welding Engineer (JWES)
• Welding Inspection Personnel (TWI)
• Material and Heat Treatment (Bochler)
• Piping Inspection (MIGAS)
• Train for The Trainer (MPI)
• etc